EQUATOR Trolley Accessory for Inokim Light Electric Scooter
This handy trolley add-on allows you to easily pull your Inokim Light electric scooter along like a piece of luggage. Now you can trolley it around without having to lift it up, giving you even more convenience and mobility.
This trolley is tailor made for the Inokim Light electric scooter. The trolley mounts securely with 3 screws which are provided. The screws fit into existing mounting holes on the scooter, no drilling is necessary. You can mount or dismount it by yourself in minutes.
Our original design is simple but effective. The bracket is made from a single sheet of 3mm thick steel and a single hardened steel rod. The wheels are hard-wearing and silent polyurethane wheels. These are mounted on industrial grade bearings which are durable and smooth rolling.
The EQUATOR Trolley Accessory for Inokim Light Electric Scooter is carefully hand-welded and bent by experienced machinists in our metal workshop in Singapore. They are shipped from Singapore.
Tools and screws required for installation are included. This product will only fit the Inokim Light and Inokim Light 2 electric scooters. It does not mount on scooters of other brands or models.
- Designed and made in Singapore.
- Easily installed or uninstalled with just three screws. Tools are included.
- Durable and silent polyurethane wheels.
- Smooth rolling industrial bearings.
- Scratch resistant power-coated paintwork.
- Wheels and bearings comply with skateboard specifications so they can be easily replaced if damaged or lost.
- 1 year warranty against manufacturing defects.
How to Install
Using the 2.5mm Hex Allen key, remove the mounting bolt at the top of the deck near the front end of the scooter.
Using the 3mm Hex Allen key, remove the two mounting bolts at the bottom of the deck near the front end of the scooter.
Be careful not to detach the plastic cap from the body of the scooter. This is because the cap holds in wiring and internal components. If they spill out, it takes some patience and care to tuck them back in order to put the cap back in place.
Fit the trolley bracket securely over the plastic cap on the front end of the scooter.
The bracket is designed to fit tightly over the cap. If you have difficulty fitting the bracket over the plastic cap because it seems too tight, use sandpaper to sand away some thickness from the protruding mounting holes on the bottom of the plastic cap. Then and try again until you can fit the bracket on securely.
Press the bracket firmly onto the deck of the scooter. Be mindful to line up the mounting slots on the bracket with the mounting holes on the plastic cap.
To secure the bracket, use the three mounting bolts provided (not the original ones removed from the scooter). Use the 3mm Hex Allen key for all these mounting bolts. First, secure the two bolts at the bottom of the deck. This is followed by the one at the top.
Once this is done, the trolley is ready for use.